- Low height
- Space-saving assembly
- High level of flexibility
- Diameter from 7 mm
- Available for immediate delivery
W2 05 110
When choosing the right IDEAL-small hose clamp, it is important to first establish which environmental conditions are expected and also what the requirements are regarding corrosion resistance. The material qualities available range from W2 to IDEAL clamps made of chrome-nickel steel with the designation W4.
The external diameter of the connecting elements is then established. The 3-character designation denotes the largest diameter for which each IDEAL-small hose clamp is designed. It also denotes the internal diameter of the IDEAL-small hose clamp as supplied. All IDEAL-small hose clamps have a large clamping range. The closely graduated IDEAL-small range allows for the assembly time, i.e. the screwing operation required to adjust the diameter, to be kept as short as possible and the overhang of the band end to be limited.
Finally, the required clamping force has to be determined and also the contact pressure that is appropriate for the relevant hose connection. How robust does the IDEAL-small hose clamp have to be for the specific application?
|Artikel no. (external clamping range max. Ø)||from (min. Ø in mm )||to (max. Ø in mm)|
Band and casing made of chrome steel 1.4016. Low to moderate level of corrosion resistance. However, even corroded connections are guaranteed to be detachable at all times.
All components made of chrome-nickel steel (1.4301) (V2A). High level of corrosion resistance and high-quality finish.
Casing: Band thickness 0.80 mm
With the IDEAL-small hose clamp, the band steel which is up to 0.8 mm thick allows for precise screw and band guidance for normal force transmission. As a result, sufficient breaking torques are achieved at the same time at low-level idle torques. In combination with the comparatively low-level friction and the worm drive, this results in acceptable clamping force levels.
Threaded bands: Band thickness 0.60 mm
The band thickness if 0.6 mm used allows for considerable clamping forces, which derive from the solid design of the engraved thread. At the same time, the selected materials ensure a high level of elasticity and therefore a very good, interlocking fit with the external diameter of the hose.
IDEAL hose clamps are packaged as follows:
DIN = Deutsches Institut für Normung
AISI = American Iron and Steel Institute
SS = Swedish Standard
|Material||DIN||AISI / AS||SS|
IDEAL Schlemper quality
Erfahren Sie mehr über unser Unternehmen in unserem neuen Image-Film.