IDEAL-DIN 3017 | Band width 9 mm
- All standard applications
- High clamping force at low band width and low weight
- Compact design
- Diameter from 8 mm
- Standard programme available from stock
W1 09 040
When choosing the right IDEAL hose clamp, it is important first to establish which environmental conditions are expected and also what the requirements are regarding corrosion resistance. The material qualities available range from zinc-plated clamps with the designation W1 to IDEAL clamps made of chrome nickel steel with the designation W5.
The external diameter of the connecting elements is then established. The 3-character designation denotes the largest diameter for which each IDEAL hose clamp is designed. It also denotes the internal diameter of the IDEAL hose clamp as supplied. The closely graduated IDEAL range allows for the assembly time, i.e. the screwing operation required to adjust the diameter, to be kept as short as possible and the overhang of the band end to be limited.
Finally, the required clamping force has to be determined and also the contact pressure that is appropriate for the relevant hose connection. How robust does the IDEAL hose clamp have to be for the specific application?
|Article no. (external clamping range max. Ø)||from (min. Ø in mm )
(max. Ø in mm)
All components made of zinc-plated steel. Low level of corrosion resistance. CrVI-free
Band and casing made of chrome steel (1.4016). Low to moderate level of corrosion resistance. However, even corroded connections are guaranteed to be detachable at all times.
All components made of chrome-nickel steel (1.4301) (V2A). High level of corrosion resistance and high-quality finish.
All parts made of chrome-nickel molybdenum steel (1.4401) (V4A). Highest level of corrosion resistance (seawater resistant). Highly magnetisable.
Casing: up to 1.20 mm material thickness
The band steel for the IDEAL hose clamp, which is up to 1.2 mm thick, allows for secure screw and band guidance for the transmission of high forces. As a result, high breaking torques are achieved at the same time at low-level idle torques. In combination with the comparatively low-level friction and the worm drive, this results in high clamping forces.
for IDEAL hose clamps with a diameter of between 12 mm and 45 mm: Band thickness 0.70 mm
for IDEAL hose clamps with a diameter of over 50 mm: Band thickness 0.80 mm
High clamping forces can be achieved with these band thicknesses and the stable design of the engraved thread. At the same time, the selected materials ensure a high level of elasticity and therefore a good fit with the external diameter of the hose.
You can even rely on our packaging!
We attach great importance to the quality and durability of our packaging material. Our cartons, labelled in four languages (German, English, French and Italian), have an appealing design and are very distinctive. The extended insert flap allows for particularly good stacking.
DIN = Deutsches Institut für Normung
AISI = American Iron and Steel Institute
SS = Swedish Standard
|Material||DIN||AISI / AS||SS|
Exceeds DIN 3017 standard
Easy to assemble
Exhaust gas technology
Erfahren Sie mehr über unser Unternehmen in unserem neuen Image-Film.